
Wood Fences
A wood fence closes the yard with boards and a warm face, and it gives you full privacy. It needs stain to keep that look. Hang a gate that latches on the same line.

Wood, chain link, vinyl, and metal fence installation, repair, and gates for Eau Claire homes and businesses.
Request a Free Estimate
Name, phone, and fence type. The project note is optional.
Privacy & Security
Board on board or shadow box privacy, no gap at the bottom for pets to slip under, and gates that latch. City height limits apply.
Built to Last Wisconsin Winters
Posts belong below Wisconsin's 48 in frost line, or they heave. Wood needs re-staining; vinyl and aluminum don't.
Styles That Look Great
Wood, chain link, vinyl and metal fence types in privacy, picket and pool styles. Finished side faces out (city rule).
What Changes the Price
Material, length, height, gates, slope, roots and rock, and old fence removal.
How Long It Takes
Most yards take 1 to 3 days on site once materials arrive. Permits and utility locates come first.
National average $20 to $60 per linear foot for wood or vinyl, about $4,000 to $12,000 for 200 ft.
Sources: Wisconsin Uniform Dwelling Code (frost depth); City of Eau Claire fence rules; HomeGuide, Fence Installation Cost, updated 2026-02-03. Dollar figures are national averages, not our rates.
Eau Claire Premium Fencing Company installs new fences and repairs fences that lean, rot, or took a storm hit. Wood, chain link, vinyl, and metal cover the builds, along with privacy, picket, and pool styles, gates, and replacement of a worn fence. A new line and a repair are different jobs.
It starts with a free on-site estimate. A good fence quote names the material and height, lists the gates, and says whether old fence removal is included, so you can compare it to anyone else's.

A wood fence closes the yard with boards and a warm face, and it gives you full privacy. It needs stain to keep that look. Hang a gate that latches on the same line.

Chain link keeps a yard usable without a solid wall. Run the mesh low so kids and pets stay in, and use a gate that latches. It fits a back lot where you want the boundary and still want to see through it.

Vinyl holds its color without stain or paint. That is the reason to pick it when weekend upkeep is the thing you want to skip. Cold makes the panels stiffer, so a hard hit can crack one. Plan the runs with that movement in mind.

A metal fence stays open, so the house and the yard still show. It marks a front walk or a pool edge without building a wall. The pickets and rails are the whole face. Use it when the fence should mark the yard and still let you see through.

A privacy fence is a solid run that blocks the view into the patio or the back door. Wind loads a solid face harder than an open one, so the posts have to match that. Height is a city limit. Check it before you settle on a tall panel.

Picket fences mark the front lawn without hiding the house. The gaps are the style. They usually sit along the walk and the porch, low enough that the door still reads from the street. Paint color is a later choice.

A pool fence has one job: keep a barrier around the water, with a gate that closes and latches by itself. Local barrier rules set the height and the latch height. Confirm them for your address before the layout is final.
Eau Claire Premium Fencing Company repairs fences after wind, heavy snow, and the slow lean that shows up in spring. A leaning section, a broken board, or a gate that will not latch is enough to start. The visit shows whether a repair holds or the line should come out and be replaced.
Get a Free EstimateEau Claire Premium Fencing Company hangs walk gates and drive gates, on a new fence or on one already standing.

Single and double driveway gates cover a car width or a trailer width, and the hinge posts have to carry that load. An automatic opener is separate equipment, and it is not part of every gate job.
Walk gates on a wood fence should match the boards beside them, usually at the side yard. The frame needs a diagonal brace, or the latch side drops after a season of swinging.
Walk and drive openings on chain link use the same mesh as the fence, on a heavier gate post. The post carries the leaf all day, so it is not a line post with a hinge added.
These gates keep the open look of a metal fence at the walk or the drive. An iron gate profile is common. Hinge posts have to stay stiff, or the leaf sags and the latch misses.

Storage yards, parking edges, and the back of a shop are the usual lines. The layout follows how trucks get in and out. Tell us what has to stay on the lot and where the opening goes.
This is rural and township land, not a city lot. Farm fencing marks pasture and a farm lane. Wire that a city does not allow stays outside Eau Claire city limits.
Eau Claire Premium Fencing Company builds a quote from the line. Multiply linear feet by the installed price per foot for the material and style, then add gates, old fence removal (national average $10 to $20 per linear foot), a survey if the corners are not known ($200 to $1,200), and stain or paint on wood ($2 to $14 per linear foot). These are national averages, not our rates. Permit questions go to the City of Eau Claire Planning Division fence page.
Chain link is a national average of $9 to $30 per linear foot installed. The chain link section of the same guide lists $10 to $40, depending on height and coating. Black vinyl-coated chain link is $10 to $34. Privacy slats are an add-on.
Vinyl is a national average of $30 to $60 per linear foot installed. Composite, a different board, runs $20 to $85 in the same guide. Height, gates, and the run length move a real yard off the average.
Wood is a national average of $20 to $50 per linear foot installed. Pressure-treated and cedar move that price. Stain or paint adds a national average of $2 to $14 per linear foot. Metal has no cost heading of its own, so aluminum and wrought iron are in the table.
| Material | National average |
|---|---|
| Wood | $20 to $50 |
| Aluminum | $25 to $75 |
| Wrought iron | $50 to $85 |
Want a figure for your yard? Ask for a free on-site estimate.
| Length | National average |
|---|---|
| 100 ft | $2,000 to $6,000 |
| 150 ft | $3,000 to $9,000 |
| 200 ft | $4,000 to $12,000 |
| 300 ft | $6,000 to $18,000 |
| Style | National average |
|---|---|
| Privacy (6 ft) | $25 to $60 |
| Picket | $20 to $50 |
| Rail | $15 to $35 |
Source: HomeGuide, Fence Installation Cost, updated 2026-02-03 (homeguide.com/costs/fence-installation-cost). Every dollar figure in this section is a national average, not a rate from Eau Claire Premium Fencing Company.
The yard gets measured with you, the material and height get picked, and the price goes in writing.
You confirm the property line from pins or a survey. A Diggers Hotline locate has to happen before posts, and it needs at least 3 working days.
Posts go below frost depth, in concrete or compacted gravel. Line posts and gate posts get checked for plumb. Depth follows the fence, not one number for every hole.
Panels, rails, or pickets go up next. Gate hardware is last, and the latch is lined up so the leaf closes clean.
Walk the finished line and check the gates, the latches, and the grade along the posts before the job is called done.
Eau Claire Premium Fencing Company installs fences in Eau Claire, Chippewa Falls, Altoona, Lake Hallie, and Menomonie.
City lots and bigger parcels are both in range. If you are just past these five towns, ask and we will tell you if we can come measure.
Yes. The City of Eau Claire requires a fence permit. The application needs a site plan showing property lines, buildings, and where the fence will sit. Rules also depend on the district. Start with the City of Eau Claire Planning Division fence page, and do not assume a city lot and a township lot follow the same rule.
We install fences and gates. We don't sell fence panels or materials for do-it-yourself projects, and we don't install electric, invisible or underground pet fences. That's a different trade. Barbed wire and electric fences are also generally not allowed on a city lot in Eau Claire. Farm fencing is for rural land outside the city.
It depends on the yard. The city sets a lower limit in front yards than in many side and rear yards, and corner lots are tighter. Commercial districts are different again. Read the City of Eau Claire Planning Division fence page for your address before you pick a height.
The finished side faces your neighbor. On a wood or screening fence, the city wants the smooth face toward the lot next door, with posts and rails on your side. A fence that looks finished from both sides is a different build. Confirm it on the City of Eau Claire Planning Division fence page.
Posts belong below Wisconsin's 48 in frost line, or frozen ground can lift them. That is what a sound fence needs. It is not one hole depth for every job. Soil, fence height, and the material still change the hole. A shallow post is the one that heaves.
Most yards take 1 to 3 days on site once the materials are there. The wait before that is longer. A city permit and a Diggers Hotline locate, which needs at least 3 working days before digging, both add time. Weather and material lead time can add more. The on-site days are the build, not the wait.
Usually because they're not for the same fence. One sets posts deeper or in concrete, and one doesn't. One uses steel posts, one uses wood. One includes old fence removal, the gates or the permit, and one leaves them out. Before you compare prices, check that both quotes list the same material, height, gates and tear-out. The cost section above shows what moves the price.
You confirm the line before posts go in. Survey pins or a current survey are how the corners get known. A fence that lands on the neighbor's side is a hard mistake to undo, and it is a common one when people guess. If the pins are missing, a survey is the clean way to know.
Yes. Panels and mesh can sit low with tight gaps, and a gate that latches keeps the opening closed. Wood and chain link both work for this. Mention your pets at the estimate so the bottom of the fence and the gate get planned for them.
Do not count on a winter install. Frozen ground makes post holes slow, and many builds wait for a thaw. Spring through fall is the easier window for setting posts. If you want a date in the cold months, say so at the estimate and the ground conditions decide what is possible.
Early fall. Most of the wait comes before the build: the city permit, a Diggers Hotline locate (at least 3 working days) and materials. Once the ground freezes, post holes get slow, and many builds wait for spring.
Old fence removal is its own line, not something to assume is in the fence price. Tear-out and haul-off run a national average of $10 to $20 per linear foot. The quote should show that line if the old fence has to come out. Rotten posts at the soil line are part of that tear-out.
Bring a rough length, the material you are considering, the height, and how many gates you want. Photos of the yard help the conversation. You do not need a perfect measurement. The on-site visit is where the line gets measured and the options get real.
Source: Wisconsin Uniform Dwelling Code, 48 in frost depth. Diggers Hotline, at least 3 working days before digging. Typical residential yards, 1 to 3 days on site once materials arrive. Dollar figures: HomeGuide, Fence Installation Cost, updated 2026-02-03.
Get a Fence Estimate in Eau Claire
We will measure the line and walk the options with you. Tell us about your yard and what you want the fence to do: privacy, keeping kids and pets in, or finishing the yard. We'll set up a free on-site estimate.